Nationals at Richmond Yacht ClubMay 20 - 22
Result
PosBoatTotalRace 1Race 2Race 3Race 4Race 5Race 6Race 7
1Peaches184(4)3(7)4(11)4(15)1(16)1(17)2 (19)
2Motorcycle Irene181(1)2(3)3(6)3(9)5(14)3(17)3 (20)
3Under the Radar237(7)1(8)1(9)1(10)3(13)5(18)5 (23)
4Hot Sheet242(2)4(6)3(9)4(13)2(15)2(17)7 (24)
5Magic Bus303(3)5(8)5(13)6(19)6(25)4(29)1 (30)
6Bombora516(6)7(13)8(21)5(26)4(30)15(45)6 (51)
7Fired Up!5412(12)8(20)6(26)8(34)9(43)7(50)4 (54)
8Freaks on a Leash579(9)9(18)7(25)7(32)7(39)9(48)9 (57)
9Abigail Morgan628(8)11(19)10(29)9(38)10(48)6(54)8 (62)
10Dianne7510(10)10(20)9(29)DNS(45)12(57)8(65)10 (75)
11Artemis765(5)6(11)12(23)DNS(39)11(50)10(60)DNF (76)
12Public Enemy8012(12)12(24)11(35)10(45)8(53)14(67)11 (78)
13Tequila Mockingbird8811(11)14(25)14(39)11(50)14(64)11(75)13 (88)
14Current Affair8814(14)12(26)13(39)12(51)13(64)12(76)12 (88)
15Phoenix10715(15)RET(31)RET(47)DNS(63)15(78)13(91)DNF(107)
export csv

GPS Tracks
[ Upload a GPS Track ]

Regatta Message Board

Reply | Post New Message | All Messages | this message is spam
Author: Brendan
Subject: lewmar hatch replacement
Info: (916 views) Posted: Friday 1-26-24 03:33:21 PM
Some details on replacing your front hatch:

If you want the hatch opening aft, no modern hatches will fit without a riser--they will hit the lip on the deck when opened. This is a problem with most boats built in Santa Cruz (Moore, Express, Olson, etc). If the hatch opening faces forward, it may stop on the mast before interfering with the lip.

On Express 27s, I've been installing Lewmar 60 medium profile hatches with a 3/4" riser made out of Starboard. I have a template for the riser so I can cut them out with a router. It adds to the cost ($140 for the Starboard, plus time to manufacture). I also put rubber door stops (from any hardware store) on the corners of the hatch to provide a better landing when the hatch is opened all the way.

I've been told that 3/4" is not enough riser for the Lewmar 60 low profile hatch.

I have not installed a new Lewmar Ocean 60 hatch, so cannot confirm the height of riser required.

Feel free to contact me if you have questions about hatch installs...

--brendan

:: I have a leaky seal and lots of crazing in my lewmar
:: hatch.

:: Replace it or fix it? I'm feeling lazy. Anyone has a
:: part # to replace/repair?

Reply | Post New Message | All Messages | this message is spam