Elite Keel at San Francisco Yacht Club | May 18 - 19 |
Story |
Congratulations to Dianne with their win in the Elite Keel Regatta.
Here is Steve's Top Ten List that he has submitted for publication. ELITE KEEL STORY-A LIST OF TEN THINGS THAT HELPED DIANNE 1) The crew: Jarian Westfall, Laurel Schmidt, Mike Pastrone, Jeff Fellicetti 2) Will Paxton wasn't there. 3) This crew can change head sails, the hanked kind, in less then 2.3 minutes. 4) Wilie E Coyote didn't race Sunday. 5) Sun was shining. 6) It was my birthday weekend. 7. El Raton wasn't there. 8. We went left when we could. 9. The wind was blowing. 10. This crew has 59 combined years sailing with me. |
Result | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Regatta Message Board |
Reply | Post New Message | All Messages | this message is spam |
Author: Brendan Busch ([email protected]) contact the author Subject: Cap Screws for Deck Hardware Info: (19541 views) Posted: Tuesday 8-12-03 08:05:21 AM |
:: Are you referring to the barrel nuts with a Phillips
:: head on the inside of the cabin? If so you can purchase
:: them from West Marine but they want over $4.00 each for
:: the little buggers! The company that makes them is
:: Fasco, but I don’t know if they sell to the public. I
:: bought mine from a local place called Ladd’s in Stockton
:: Ca for about $0.70 each. While they don’t stock the
:: parts they ordered mine and had them the next day. I
:: stopped by there today and they said they would be happy
:: to have some shipped to you if you want. Their number is
:: (209) 477-9520.
::
:: You may have to buy a minimum of 25 but as I recall
:: there are a lot of them in the boat, and the factory
:: ones are chrome plated which peeled and corroded in my
:: boat. The ones made by Fasco are stainless and of much
:: higher quality in my opinion. Double-check what size you
:: need because there were 2 different sizes on my boat. I
:: have some leftover so if you only need a couple, and
:: can’t find them locally, drop me a line and I’ll send
:: you some.
::
:: Russ
::
::
:: :: Does anybody have a source for the cap screws used in
:: :: the interior for holding the deck hardware in place?
Reply | Post New Message | All Messages | this message is spam |
|