Delta Ditch Run at Stockton Sailing Club/Richmond Yacht ClubJune 2
Story
Norcalsailing report featuring Summer Palace:
http://www.norcalsailing.com/entries/2012/06/05/ditchrun2.html#.T-iWoI2Mfqs

Below quoted from Pressure Drop: Drew Scott was helming a F-28.

"My crew is starting to swing around to pick me up when El Raton, in perfect control slides up beside me and asks if I would like to get picked up. They had already doused their chute and stopped beside me. I took their offer and got back into a boat (trying to stop a lightweight trimaran next to someone when it is blowing in the mid-20s is not easy so I figured I would not turn down El Raton.

My crew ably finished the race on Papillon, only one boat behind El Raton! And I had many adventures with El Raton, but that is their story to tell.

So, a great big thank you to the Ray Lotto and the crew of El Raton for pulling my soggy hide out of Suisun Bay!!

Drew Scott
Papillon (most of the time)"
Result
PosBoatTotalRace 1
1El Raton11
2Magic Bus22
3Peaches33
4Scandalous44
5Wile E Coyote55
6Loose Cannon66
7Take Five77
8Ergo88
9Great White99
10Libra1010
11Summer Palace1111
export csv

Regatta Message Board

Reply | Post New Message | All Messages | this message is spam
Author: Eric Deeds
Subject: Mast step fiberglass compression issues
Info: (17932 views) Posted: Tuesday 11-10-09 01:19:59 PM
Bryan, I was having some problems with compression under the mast step, the aft edge the step was actually impacted by 1/8 inch or so, and there was cracking in the back and along the sides, so we had a plate of g10 fiberglass installed under the mast step to better spread the load, probably in the neighborhood of 6 x 9 inches (larger footprint than the mast step). You should also check the load bearing structure under the mast in the cabin, we had some work done there as well.

Eric Deeds #41

:: The fiberglass beneath my mast step has a few cracks and
:: maybe even a bit of compression from it's normal
:: thickness.
::
:: Anybody else noticed this on their boats? What can be
:: done about it?

Reply | Post New Message | All Messages | this message is spam