Mast step fiberglass compression issues

Replying to this message

Reply | Post New Message | All Messages | this message is spam

Author: Yoshi Nakai ([email protected]) contact the author
Subject: Mast step fiberglass compression issues
Info: (5352 views) Posted: Monday 7-29-19 11:58:02 PM

Sorry, this message has been deleted.

Reply | Post New Message | All Messages | this message is spam

HTML will be stripped from message.
A URL will be activated if it begins with http:// or https://
Text will be formatted as paragraphs, unless the line begins with a '-'
You can preview your message to see how it will appear.

Your Name
Your E-Mail (optional)
Subject
Password (optional - allows you to delete later)

:: i have same issue on #104. Tim Sarns shop is repairing
:: now. 
:: 
:: 
:: :: :: The fiberglass beneath my mast step has a few cracks and
:: :: :: maybe even a bit of compression from it's normal
:: :: :: thickness. 
:: :: :: 
:: :: :: Anybody else noticed this on their boats? What can be
:: :: :: done about it? 
:: :: 
:: :: Our boat repair guru in Detroit, Tim Sarns, told me that
:: :: he has repaired several boats (not E27s) with
:: :: compression under the mast step by removing the step and
:: :: the deck skin under it; removing the bad core under it
:: :: and epoxying a thick aluminum plate under the mast step
:: :: plate. The aluminum plate should be a fair amount wider
:: :: and longer than the mast step plate in order to spread
:: :: the compression load. Once the aluminum plate is in
:: :: place the area above it can be filled and faired and a
:: :: new fiberglass cloth epoxied in on top of the aluminum
:: :: plate and faired. Then the deck plate can be
:: :: re-installed. As already mentioned, any problems below
:: :: with the bulkheads or the wood cross beam or ash A-frame
:: :: mast support should be addressed also.