Aldo Alesio at St. Francis Yacht Club | August 18 |
|
Here is what I did....pretty effective and very light. I removed all
of the hardware from inside of the boom and replaced it with a single
3/16ths vectran line. The line is led to a small bullet block in the
front of the boom that is then led to a dinghy vang type purchase
that attaches to the base of the mast. VERY easy to control from the
rail. So far so good...the breaking stregnth of the vectran is about
2000lbs so it should hold up. Regards, Vin McAteer Divided Sky #115
|