Aldo Alesio at St. Francis Yacht ClubAugust 18
Looking for a Ride or Crew
None.
Boats Racing
None.
Sign Up
Sail Number
Boat Name
Name
Note

Note: To remove an entry fill in just your sail number or your name.
All fields are optional.
GPS Tracks
[ Upload a GPS Track ]
Regatta Message Board
Reply | Post New Message | All Messages | this message is spam
Author: Ralph Deeds ([email protected]) contact the author
Subject: Re: Bridle-less spin pole
Info: (25270 views) Posted: Wednesday 11-14-01 04:46:00 PM
I agree with Jason that the pole would break if you just fastened the topping lift and foreguy to the center of the pole without a bridle (unless you used a large diameter pole which would defeat the purpose). I also agree that a short spectra bridle is light and doesn't get in the way hardly at all.

Other ideas to consider: (1) Use a pole launcher mounted on the boom. Quantum San Francisco makes one that works very well for me. On a takedown you just shove the pole into the bag along with the topping lift, bridle and foreguy, and everything is out of the way and you're clear to tack imediately with no worries about Keepint the jib sheets out from under the pole. (2) Run the foreguy to the base of the mast instead of the middle of the foredeck and make it double ended so it can be trimmed from either side. Mine terminate in Harken camcleats on either side next to the grab rails about half way back where they can be accessed by the bow man or aft crew. [The advantage of running the foreguy to the base of the mast is that you can trim the pole fore and aft without having to adjust the foreguy. The disadvantage is that the foreguy angle doesn't hold the pole forward and the bow person sometimes has to push the pole forward after a set.]

(3)Rig the foreguy with stainless snap shackles which are very light and can be easily unsnapped if something gets fouled.

Also, I've noticed a lot of fast boats in San Francisco launching out of the front hatch, but I've never tried it.

Reply | Post New Message | All Messages | this message is spam