Nationals at Richmond Yacht ClubMay 20 - 22
Result
PosBoatTotalRace 1Race 2Race 3Race 4Race 5Race 6Race 7
1Peaches184(4)3(7)4(11)4(15)1(16)1(17)2 (19)
2Motorcycle Irene181(1)2(3)3(6)3(9)5(14)3(17)3 (20)
3Under the Radar237(7)1(8)1(9)1(10)3(13)5(18)5 (23)
4Hot Sheet242(2)4(6)3(9)4(13)2(15)2(17)7 (24)
5Magic Bus303(3)5(8)5(13)6(19)6(25)4(29)1 (30)
6Bombora516(6)7(13)8(21)5(26)4(30)15(45)6 (51)
7Fired Up!5412(12)8(20)6(26)8(34)9(43)7(50)4 (54)
8Freaks on a Leash579(9)9(18)7(25)7(32)7(39)9(48)9 (57)
9Abigail Morgan628(8)11(19)10(29)9(38)10(48)6(54)8 (62)
10Dianne7510(10)10(20)9(29)DNS(45)12(57)8(65)10 (75)
11Artemis765(5)6(11)12(23)DNS(39)11(50)10(60)DNF (76)
12Public Enemy8012(12)12(24)11(35)10(45)8(53)14(67)11 (78)
13Tequila Mockingbird8811(11)14(25)14(39)11(50)14(64)11(75)13 (88)
14Current Affair8814(14)12(26)13(39)12(51)13(64)12(76)12 (88)
15Phoenix10715(15)RET(31)RET(47)DNS(63)15(78)13(91)DNF(107)
export csv

GPS Tracks
[ Upload a GPS Track ]

Regatta Message Board

Reply | Post New Message | All Messages | this message is spam
Author: Rachel
Subject: hull flexing and backstay
Info: (12307 views) Posted: Saturday 7-3-10 07:09:02 AM
So I had several people look at it, and give me the thumbs up. No delam, just very subtle flexing of a mm or 2. Something to watch, may be an issue in 20 years. I may change the attachment system at some point, or reinforce it.

Rachel

:: It doesn't sound good to me. It would be interesting to
:: hear from others who have their backstay rigged this
:: way. On Moxie, we have ours completely external and the
:: backstay attaches below the scuppers on the transom.
:: Sounds like this is a much more secure location as it is
:: at a hull joint where there is a lot of support and
:: structure. We have had our backstay rigged like this for
:: many years and I like it a lot.
::

:: -Jason
::
:: :: it still sounds pretty sharp when you tap on it, not
:: :: dull like delam.
:: ::
:: :: :: Do you have a delaminated inner skin? Really weird.
:: :: ::
:: :: :: mb
:: :: ::
:: :: :: :: Anyone ever watched the bottom of the hull flex while
:: :: :: :: applying backstay? Is this ok?
:: :: :: ::
:: :: :: :: Here's what me and JP noticed while fixing our backstay
:: :: :: :: system. Our backstay, like most of the boats I think,
:: :: :: :: has 2 main attachments: 1 is the deck hull joint just
:: :: :: :: port of the tiller; the 2nd is on the floor of the boat,
:: :: :: :: where there are 2 little fiberglass bulkheads just to
:: :: :: :: starboard of the exiting scupper where the floor meets
:: :: :: :: the transom. There are little chainplates on each of the
:: :: :: :: little bulkheads. The starboard line of the backstay
:: :: :: :: divides and one end attaches to one chainplate and the
:: :: :: :: other end goes through a block attached to the other
:: :: :: :: chainplate and starts the fine tuning system. After we
:: :: :: :: fixed everything, one of us was below looking at the
:: :: :: :: attachments on the little bulkheads, while the other one
:: :: :: :: hauled on the backstay from up above. When the backstay
:: :: :: :: is on, the floor of the boat lifts!! And when you pull
:: :: :: :: it on and off, the floor just goes up and down. Yikes!
:: :: :: :: Does this happen on anyone else's boat? Is this ok?
:: :: :: :: Thanks!
Reply | Post New Message | All Messages | this message is spam