Mike,

Who did your repairs? Also, do you have any photos? I would like to get mine fixed before too long. I'm also going to try to get my deck resurfaced soon.

Thanks, Dave

::
:: ::
::
:: Hi: Dave:
::
:: The rig of you boat is compressing through the deck and
:: warping the upper horizontal bridge of support.
::
:: The legs which hold up the horizontal support on the
:: front side of the bulkhead may also be warping . . .and
:: the bulkhead in plane can itself warp and buckle.
::
:: The first 30 boats all suffered this compression issue .
:: . . where the legs of the support do not tranverse the
:: flat plane of the V-berth all the way down to within an
:: inch of the hull. Your's may or may not. Mine do now.
::
:: I had the horizontal wood pieces fore and aft removed,
:: the vertical legs removed, new full length legs forward,
:: partial legs aft.
::
:: Beefy'er timber was used on the Deperado's upgrade. Some
:: people simply sandwiched the bulkhead with two pieces of
:: marine plywood.
::
:: A jack is sometimes used to push the bulk head
:: upstraight again prior to regluing the new beefy'er
:: supports.
::
:: Mike
::
::
:: ::
:: :: I've got a small crack in my bulkhead. Anyone else seen
:: :: similar problems? I've got some ideas of how to fix it,
:: :: but want to see if anyone else has some prior experience
:: :: with this repair on these boats.
:: ::
:: :: Photos:
:: ::
:: :: http://static.flickr.com/104/287304605_7cb98f184e.jpg?v=0
:: ::
:: :: http://static.flickr.com/110/287304603_ea015a9031.jpg?v=0
:: ::
:: :: Thanks,
:: ::
:: :: Dave
:: ::
:: :: Attack From Mars