Express 27 National Championship at San Francisco Yacht ClubOctober 5 - 7
Result
PosBoatTotalRace 1Race 2Race 3Race 4Race 5Race 6Race 7
1Magic Bus283(3)5(8)6(14)2(16)1(17)1(18)10 (28)
2Motorcycle Irene292(2)2(4)14(18)1(19)7(26)2(28)1 (29)
3Get Happy!!344(4)3(7)11(18)5(23)3(26)6(32)2 (34)
4Thumper3711(11)1(12)2(14)9(23)4(27)5(32)5 (37)
5Fired Up!421(1)4(5)8(13)8(21)5(26)10(36)6 (42)
6Current Affair5112(12)6(18)10(28)3(31)13(44)4(48)3 (51)
7Tequila Mockingbird625(5)7(12)17(29)4(33)2(35)14(49)13 (62)
8Andale627(7)10(17)3(20)12(32)11(43)7(50)12 (62)
9Abigail Morgan6413(13)13(26)1(27)6(33)9(42)11(53)11 (64)
10Wile E Coyote686(6)9(15)7(22)OCS(40)RET(58)3(61)7 (68)
11Salty Hotel719(9)8(17)4(21)11(32)10(42)12(54)17 (71)
12X-Wing7610(10)14(24)13(37)14(51)8(59)9(68)8 (76)
13Bombora8316(16)15(31)15(46)10(56)15(71)8(79)4 (83)
14Peaches8714(14)12(26)16(42)7(49)6(55)17(72)15 (87)
15Take Five908(8)11(19)9(28)16(44)16(60)16(76)14 (90)
16Artemis9417(17)16(33)5(38)13(51)14(65)13(78)16 (94)
17Hang 209515(15)17(32)12(44)15(59)12(71)15(86)9 (95)
export csv

Regatta Message Board

Reply | Post New Message | All Messages | this message is spam
Author: Ralph Deeds ([email protected]) contact the author
Subject: E27 hull numbers and boom vang repair
Info: (25950 views) Posted: Tuesday 10-26-10 05:17:59 PM

:: Hello Mike,

:: The hull number is found within the serial number
:: beginning with ABQ that is

:: located on the outside, at the top edge of the transom,
:: starboard side.

:: The the hull number is the 6th, 7th and 8th in that row,
:: ie 080 would be hull 80.

:: The last four is the manufacture date.

:: Please share the hull number once you find it and list
:: your information on the class roster.
::
:: Regards,

:: Peggy.
::
::
:: :: How do you find the hull number on an Express 27?
::
:: :: Also, we tore the boom vang swivel cleat out of the top
:: :: of the deck and are looking for repair advice.
::
:: :: Thank you.
Hello, Mike, Here's how I would repair the deck under the swivel cam for the boom vang:

Remove vang. Tape the holes under the deck. Fill the damaged part of the deck under the swivel with a mix of epoxy, filler and chopped fiberglass cloth. Fair the surface of the deck. Re-drill the holes and re-install the swivel cam with a stainless steel or aluminum backup plate to spread the load. There is quite a load on the swivel. (I'm not a boat repair professional, so you might want to consult Will Paxton who is a professional.)

Ralph Deeds

Reply | Post New Message | All Messages | this message is spam