Express 27 National Championship at San Francisco Yacht ClubOctober 5 - 7
Result
PosBoatTotalRace 1Race 2Race 3Race 4Race 5Race 6Race 7
1Magic Bus283(3)5(8)6(14)2(16)1(17)1(18)10 (28)
2Motorcycle Irene292(2)2(4)14(18)1(19)7(26)2(28)1 (29)
3Get Happy!!344(4)3(7)11(18)5(23)3(26)6(32)2 (34)
4Thumper3711(11)1(12)2(14)9(23)4(27)5(32)5 (37)
5Fired Up!421(1)4(5)8(13)8(21)5(26)10(36)6 (42)
6Current Affair5112(12)6(18)10(28)3(31)13(44)4(48)3 (51)
7Tequila Mockingbird625(5)7(12)17(29)4(33)2(35)14(49)13 (62)
8Andale627(7)10(17)3(20)12(32)11(43)7(50)12 (62)
9Abigail Morgan6413(13)13(26)1(27)6(33)9(42)11(53)11 (64)
10Wile E Coyote686(6)9(15)7(22)OCS(40)RET(58)3(61)7 (68)
11Salty Hotel719(9)8(17)4(21)11(32)10(42)12(54)17 (71)
12X-Wing7610(10)14(24)13(37)14(51)8(59)9(68)8 (76)
13Bombora8316(16)15(31)15(46)10(56)15(71)8(79)4 (83)
14Peaches8714(14)12(26)16(42)7(49)6(55)17(72)15 (87)
15Take Five908(8)11(19)9(28)16(44)16(60)16(76)14 (90)
16Artemis9417(17)16(33)5(38)13(51)14(65)13(78)16 (94)
17Hang 209515(15)17(32)12(44)15(59)12(71)15(86)9 (95)
export csv

Regatta Message Board

Replying to this message
Reply | Post New Message | All Messages | this message is spam
Author: Jason Crowson ([email protected]) contact the author
Subject: Filling Deck Holes
Info: (20883 views) Posted: Wednesday 3-2-16 10:44:01 AM
Let me recommend NOT using epoxy resin. It shrinks over time and will allow water to get back into the balsa core (ask me how I know this!). The best solution is to use vinylester resin and G-10 rod in each of the holes. The G-10 will keep you from over compressing the holes when the hardware is re-installed. Either way, you should use vinylester resin to make sure you avoid the shrinking issue. Now would be a good time to tap out the deck to make sure there are not any other areas of water entry into the deck.

Cheers, Jason

:: 3-4 inch wIde painters tape and lots of it.
::
:: :: Hi all,
:: ::
:: :: I've removed all the hardware from my deck and am about
:: :: to over-drill, fill, and re-drill.
:: ::
:: :: I'm wondering if anybody has some good tips on how to
:: :: keep the expoxy from dripping through the holes and into
:: :: the interior.
:: ::
:: :: Taped on wax paper under the hole? Wait until epoxy is a
:: :: thick consistency? Use thickeners?
:: ::
:: :: I'd love to not have to learn this one the hard way ;-)
:: ::
:: :: Thanks
:: ::
:: :: Bryan

Reply | Post New Message | All Messages | this message is spam

Your Name
Your E-Mail (optional)
Subject
Password (optional - allows you to delete later)