Elite Keel at San Francisco Yacht ClubMay 18 - 19
Story
Congratulations to Dianne with their win in the Elite Keel Regatta.
Here is Steve's Top Ten List that he has submitted for publication.

ELITE KEEL STORY-A LIST OF TEN THINGS THAT HELPED DIANNE

1) The crew: Jarian Westfall, Laurel Schmidt, Mike Pastrone, Jeff Fellicetti

2) Will Paxton wasn't there.

3) This crew can change head sails, the hanked kind, in less then 2.3 minutes.

4) Wilie E Coyote didn't race Sunday.

5) Sun was shining.

6) It was my birthday weekend.

7. El Raton wasn't there.

8. We went left when we could.

9. The wind was blowing.

10. This crew has 59 combined years sailing with me.
Result
PosBoatTotalRace 1Race 2Race 3Race 4Race 5
1Dianne113(3)2(5)2(7)1(8)3 (11)
2Peaches154(4)4(8)4(12)2(14)1 (15)
3Motorcycle Irene161(1)1(2)3(5)6(11)5 (16)
4Summer Palace247(7)6(13)5(18)4(22)2 (24)
5Abigail Morgan255(5)3(8)6(14)5(19)6 (25)
6Strega308(8)8(16)7(23)3(26)4 (30)
7Wile E Coyote322(2)5(7)1(8)DNS(20)DNS (32)
8Libra449(9)7(16)9(25)DNF(37)7 (44)
9Make Me Smile516(6)9(15)DNF(27)DNS(39)DNS (51)
10Moonlight5210(10)10(20)8(28)DNF(40)DNS (52)
11Elise60DNC(12)DNC(24)DNC(36)DNC(48)DNC(60)
export csv

Regatta Message Board

Reply | Post New Message | All Messages | this message is spam
Author: Paul Cronin ([email protected]) contact the author
Subject: Surveying a Express 27
Info: (21477 views) Posted: Sunday 3-30-14 09:33:58 PM
Thanks Ralph, Yup there is some wet core by both chainplates, only about 1' sq by each. I will replace the core in both areas. Also a nine inch sq on the port side of the mast step, rest of the deck is dry. All pretty easy fixes.

:: In my experience the most vulnerable area is the balsa
:: core around the chain plates where water tends to leak
:: into the core. These leaks can also lead to rot in the
:: bulkhead inside the cabin where the chain plates are
:: bolted. Wet balsa and rot can also occur where other
:: fittings are through-bolted to the deck and not bedded
:: properly. If caught early these situations can be easily
:: repaired by removing the fitting, drilling over-size
:: bolt holes, gouging out the wet or rotten balsa core,
:: taping the underside of the hole and filling the cavity
:: with epoxy and filler or microbaloons, re-drilling the
:: bolt holes and re-installing the fitting. Future leaks
:: will be into the cabin rather than into the balsa core.
::
:: :: Thanks for the input. There is a lot of work needed, but
:: :: we agreed on a price today. Should have her in my shop
:: :: in two weeks an sailing by May.
:: ::
:: :: :: Thank you Bryan,
:: :: ::
:: :: :: Appreciate the input, will make sure I check step,
:: :: :: rudder, and headstay where it exits the rig.
:: :: ::
:: :: :: Yes, I do have a moisture meter, and will also tap the
:: :: :: major areas.
:: :: ::
:: :: :: Even though I have been surveying for a very long time
:: :: :: it is always helpful to get great insight from owners
:: :: :: who have been through the repairs.
:: :: ::
:: :: :: Look forward to the inspection/survey and maybe being a
:: :: :: Express 27 owners.
:: :: ::
:: :: :: :: Check around the mast step (down below too) for signs of
:: :: :: :: crushing by the mast. Its an $800 fix for mine. Bring a
:: :: :: :: water meter and check everything, deck, rudder, hull.
:: :: :: :: Rudder is an expensive repair if intruded. Check for
:: :: :: :: broken strands in the forestay where it enters the
:: :: :: :: compression fitting that connects it to the mast.
:: :: :: ::
:: :: :: :: These boats are strong but neglect can take its toll.
:: :: :: ::
:: :: :: :: Others can add to this I'm sure.
:: :: :: ::
:: :: :: :: :: Hi,
:: :: :: :: ::
:: :: :: :: :: I am surveying an Express 27 on Friday, 28 March and
:: :: :: :: :: would like input from owners on trouble spots to look
:: :: :: :: :: out for.
:: :: :: :: ::
:: :: :: :: :: If you known spots that should be check that are not
:: :: :: :: :: obvious please let me know, on the message board or by
:: :: :: :: :: email.
:: :: :: :: ::
:: :: :: :: :: This boat would be for me to use shorthanded.
:: :: :: :: ::
:: :: :: :: :: Thanks you in advance.

Reply | Post New Message | All Messages | this message is spam