Elite Keel at San Francisco Yacht ClubMay 18 - 19
Story
Congratulations to Dianne with their win in the Elite Keel Regatta.
Here is Steve's Top Ten List that he has submitted for publication.

ELITE KEEL STORY-A LIST OF TEN THINGS THAT HELPED DIANNE

1) The crew: Jarian Westfall, Laurel Schmidt, Mike Pastrone, Jeff Fellicetti

2) Will Paxton wasn't there.

3) This crew can change head sails, the hanked kind, in less then 2.3 minutes.

4) Wilie E Coyote didn't race Sunday.

5) Sun was shining.

6) It was my birthday weekend.

7. El Raton wasn't there.

8. We went left when we could.

9. The wind was blowing.

10. This crew has 59 combined years sailing with me.
Result
PosBoatTotalRace 1Race 2Race 3Race 4Race 5
1Dianne113(3)2(5)2(7)1(8)3 (11)
2Peaches154(4)4(8)4(12)2(14)1 (15)
3Motorcycle Irene161(1)1(2)3(5)6(11)5 (16)
4Summer Palace247(7)6(13)5(18)4(22)2 (24)
5Abigail Morgan255(5)3(8)6(14)5(19)6 (25)
6Strega308(8)8(16)7(23)3(26)4 (30)
7Wile E Coyote322(2)5(7)1(8)DNS(20)DNS (32)
8Libra449(9)7(16)9(25)DNF(37)7 (44)
9Make Me Smile516(6)9(15)DNF(27)DNS(39)DNS (51)
10Moonlight5210(10)10(20)8(28)DNF(40)DNS (52)
11Elise60DNC(12)DNC(24)DNC(36)DNC(48)DNC(60)
export csv

Regatta Message Board

Reply | Post New Message | All Messages | this message is spam
Author: Ralph Deeds ([email protected]) contact the author
Subject: E27 hull numbers and boom vang repair
Info: (25631 views) Posted: Tuesday 10-26-10 05:17:59 PM

:: Hello Mike,

:: The hull number is found within the serial number
:: beginning with ABQ that is

:: located on the outside, at the top edge of the transom,
:: starboard side.

:: The the hull number is the 6th, 7th and 8th in that row,
:: ie 080 would be hull 80.

:: The last four is the manufacture date.

:: Please share the hull number once you find it and list
:: your information on the class roster.
::
:: Regards,

:: Peggy.
::
::
:: :: How do you find the hull number on an Express 27?
::
:: :: Also, we tore the boom vang swivel cleat out of the top
:: :: of the deck and are looking for repair advice.
::
:: :: Thank you.
Hello, Mike, Here's how I would repair the deck under the swivel cam for the boom vang:

Remove vang. Tape the holes under the deck. Fill the damaged part of the deck under the swivel with a mix of epoxy, filler and chopped fiberglass cloth. Fair the surface of the deck. Re-drill the holes and re-install the swivel cam with a stainless steel or aluminum backup plate to spread the load. There is quite a load on the swivel. (I'm not a boat repair professional, so you might want to consult Will Paxton who is a professional.)

Ralph Deeds

Reply | Post New Message | All Messages | this message is spam