Elite Keel at San Francisco Yacht ClubMay 18 - 19
Story
Congratulations to Dianne with their win in the Elite Keel Regatta.
Here is Steve's Top Ten List that he has submitted for publication.

ELITE KEEL STORY-A LIST OF TEN THINGS THAT HELPED DIANNE

1) The crew: Jarian Westfall, Laurel Schmidt, Mike Pastrone, Jeff Fellicetti

2) Will Paxton wasn't there.

3) This crew can change head sails, the hanked kind, in less then 2.3 minutes.

4) Wilie E Coyote didn't race Sunday.

5) Sun was shining.

6) It was my birthday weekend.

7. El Raton wasn't there.

8. We went left when we could.

9. The wind was blowing.

10. This crew has 59 combined years sailing with me.
Result
PosBoatTotalRace 1Race 2Race 3Race 4Race 5
1Dianne113(3)2(5)2(7)1(8)3 (11)
2Peaches154(4)4(8)4(12)2(14)1 (15)
3Motorcycle Irene161(1)1(2)3(5)6(11)5 (16)
4Summer Palace247(7)6(13)5(18)4(22)2 (24)
5Abigail Morgan255(5)3(8)6(14)5(19)6 (25)
6Strega308(8)8(16)7(23)3(26)4 (30)
7Wile E Coyote322(2)5(7)1(8)DNS(20)DNS (32)
8Libra449(9)7(16)9(25)DNF(37)7 (44)
9Make Me Smile516(6)9(15)DNF(27)DNS(39)DNS (51)
10Moonlight5210(10)10(20)8(28)DNF(40)DNS (52)
11Elise60DNC(12)DNC(24)DNC(36)DNC(48)DNC(60)
export csv

Regatta Message Board

Reply | Post New Message | All Messages | this message is spam
Author: George Lythcott
Subject: Main Sheet Traveler
Info: (10943 views) Posted: Thursday 5-4-06 02:56:24 PM
TAZ!'s current traveler has about a 1.5" high "wedge" under both ends of the traveler, has a 1/4" thick aluminum plate supporting the Main Sheet Cleating assembly and a windward sheeting car. The aluminum plate spans the distance between but does ot attach to the cockpit seats.

I'd like to optomize my new (to me) boat. I am thinking about increasing the bend in the traveler with about 4.5" high wedges. Do I need to do this? If this does make sence, instead of holding down the center of the traveler with a post to the cockpit floor, I am thinking about installing a piese of aluminum angle iron with a 1" to 1 1/2" flange under the plate to keep it from bending. Any comments?

Reply | Post New Message | All Messages | this message is spam