Elite Keel at San Francisco Yacht ClubMay 18 - 19
Story
Congratulations to Dianne with their win in the Elite Keel Regatta.
Here is Steve's Top Ten List that he has submitted for publication.

ELITE KEEL STORY-A LIST OF TEN THINGS THAT HELPED DIANNE

1) The crew: Jarian Westfall, Laurel Schmidt, Mike Pastrone, Jeff Fellicetti

2) Will Paxton wasn't there.

3) This crew can change head sails, the hanked kind, in less then 2.3 minutes.

4) Wilie E Coyote didn't race Sunday.

5) Sun was shining.

6) It was my birthday weekend.

7. El Raton wasn't there.

8. We went left when we could.

9. The wind was blowing.

10. This crew has 59 combined years sailing with me.
Result
PosBoatTotalRace 1Race 2Race 3Race 4Race 5
1Dianne113(3)2(5)2(7)1(8)3 (11)
2Peaches154(4)4(8)4(12)2(14)1 (15)
3Motorcycle Irene161(1)1(2)3(5)6(11)5 (16)
4Summer Palace247(7)6(13)5(18)4(22)2 (24)
5Abigail Morgan255(5)3(8)6(14)5(19)6 (25)
6Strega308(8)8(16)7(23)3(26)4 (30)
7Wile E Coyote322(2)5(7)1(8)DNS(20)DNS (32)
8Libra449(9)7(16)9(25)DNF(37)7 (44)
9Make Me Smile516(6)9(15)DNF(27)DNS(39)DNS (51)
10Moonlight5210(10)10(20)8(28)DNF(40)DNS (52)
11Elise60DNC(12)DNC(24)DNC(36)DNC(48)DNC(60)
export csv

Regatta Message Board

Reply | Post New Message | All Messages | this message is spam
Author: Doug Robbins
Subject: repair/replace pole
Info: (12331 views) Posted: Thursday 2-5-04 11:58:23 PM
A few years ago we had a bent spin. pole on swamp donkey. We took the ends off, chucked the pole and delivered the ends to Svendsens Boat Works in Alameda. They attached the ends to a new extrusion, and delivered a stong and great pole. Call Sean at 510-864-8403 (work) and he'll take care of it. (oh, the price was very reasonable...) p.s. we also took care of making our own bridle instead of having them do it... we used spectra- light, strong and low stretch.

:: Looking for some advice on repair/replacing the
:: spinnaker pole. I have a slight bend where the pole went
:: into the forestay. It's still usable, but I want to
:: replace the aluminum tubing or extrude it. I've heard
:: Svendson's in Alameda can extrude. Else, any
:: recommendations for purchasing tubing in the Bay Area
:: would be helpful. Also, I think I've seen the
:: instructions on making a shot gun release mechanism. Was
:: that in the Express owners manual? - Thanks!

Reply | Post New Message | All Messages | this message is spam