Elite Keel at San Francisco Yacht ClubMay 18 - 19
Story
Congratulations to Dianne with their win in the Elite Keel Regatta.
Here is Steve's Top Ten List that he has submitted for publication.

ELITE KEEL STORY-A LIST OF TEN THINGS THAT HELPED DIANNE

1) The crew: Jarian Westfall, Laurel Schmidt, Mike Pastrone, Jeff Fellicetti

2) Will Paxton wasn't there.

3) This crew can change head sails, the hanked kind, in less then 2.3 minutes.

4) Wilie E Coyote didn't race Sunday.

5) Sun was shining.

6) It was my birthday weekend.

7. El Raton wasn't there.

8. We went left when we could.

9. The wind was blowing.

10. This crew has 59 combined years sailing with me.
Result
PosBoatTotalRace 1Race 2Race 3Race 4Race 5
1Dianne113(3)2(5)2(7)1(8)3 (11)
2Peaches154(4)4(8)4(12)2(14)1 (15)
3Motorcycle Irene161(1)1(2)3(5)6(11)5 (16)
4Summer Palace247(7)6(13)5(18)4(22)2 (24)
5Abigail Morgan255(5)3(8)6(14)5(19)6 (25)
6Strega308(8)8(16)7(23)3(26)4 (30)
7Wile E Coyote322(2)5(7)1(8)DNS(20)DNS (32)
8Libra449(9)7(16)9(25)DNF(37)7 (44)
9Make Me Smile516(6)9(15)DNF(27)DNS(39)DNS (51)
10Moonlight5210(10)10(20)8(28)DNF(40)DNS (52)
11Elise60DNC(12)DNC(24)DNC(36)DNC(48)DNC(60)
export csv

Regatta Message Board

Reply | Post New Message | All Messages | this message is spam
Author: Ralph Deeds
Subject: Rudder Bearing Question
Info: (13950 views) Posted: Tuesday 4-17-07 05:42:14 PM
Bob, if you don't replace the bearing you might try wrapping some electrical tape around the outside of the bearing so that it fits more snugly. If memory serves me, I think I did that several years ago. It's not good for the bearing to turn in the hole.

:: I own #93 in Michigan.
::
:: I noticed that the lower bearing is loose in the
:: 'pocket'. Both bearings appear to be good on the rudder
:: post (no slop).
::
:: Do you think I could just lower the rudder, drop the
:: lower bearing, put some 5100 (or silicone?) around the
:: bearing O.D., then just push the bearing tightly back in
:: with the rudder and replace the collar?
::
:: Would that seem to be an adequate procedure?
::
:: Bob

Reply | Post New Message | All Messages | this message is spam