Vallejo at YRAMay 4 - 5
Result
PosBoatTotalRace 1Race 2
1Motorcycle Irene211
2Peaches532
3Desperado725
4Wile E Coyote743
5Elise1358
6Libra18126
7Strega19RAF4
8Dianne17612
9Taz!!1899
10Take Five201010
11Magic Bus217DNC
12Make Me Smile228DNC
13Abigail Morgan22RAF7
14Archimedes221111
export csv

Regatta Message Board

Reply | Post New Message | All Messages | this message is spam
Author: Russ Rieber ([email protected]) contact the author
Subject: Cap Screws for Deck Hardware
Info: (19626 views) Posted: Saturday 8-9-03 10:50:25 PM
Are you referring to the barrel nuts with a Phillips head on the inside of the cabin? If so you can purchase them from West Marine but they want over $4.00 each for the little buggers! The company that makes them is Fasco, but I don’t know if they sell to the public. I bought mine from a local place called Ladd’s in Stockton Ca for about $0.70 each. While they don’t stock the parts they ordered mine and had them the next day. I stopped by there today and they said they would be happy to have some shipped to you if you want. Their number is (209) 477-9520.

You may have to buy a minimum of 25 but as I recall there are a lot of them in the boat, and the factory ones are chrome plated which peeled and corroded in my boat. The ones made by Fasco are stainless and of much higher quality in my opinion. Double-check what size you need because there were 2 different sizes on my boat. I have some leftover so if you only need a couple, and can’t find them locally, drop me a line and I’ll send you some.

Russ

:: Does anybody have a source for the cap screws used in
:: the interior for holding the deck hardware in place?

Reply | Post New Message | All Messages | this message is spam