Berkeley Mid Winter #4 at Berkeley Yacht ClubFebruary 9
Result
PosBoatTotalRace 1
1Dan Pruzan Wile E Coyote11
2Motorcycle Irene22
3Bessie Jay33
4Freaks ona Leash44
5Mirage55
6Libra66
7Dianne77
8Wetsu88
9Take Five99
10Elise1010
11Abigail Morgan1111
12Strega1212
14Great White14DNC
14Opa!14DNC
14Peaches14DNC
14Eagle14DNC
14Magic Bus14DNC
export csv

Regatta Message Board

Reply | Post New Message | All Messages | this message is spam
Author: Jason ([email protected]) contact the author
Subject: Best Bottom Finish
Info: (24340 views) Posted: Monday 5-8-06 06:00:22 PM
So are you dry sailing or leaving it in that great Delta water?

:: This is for Loose Cannon #34, its comin along and
:: hopefully be out racing soon. Ditch Run is my target.
::
:: :: Andy,
:: ::
:: :: It depends on what you are going to do with the boat,
:: :: dry sail or wet sail. Since you are taking off the old
:: :: bottom paint I would assume dry sail. If that is the
:: :: case then I would suggest a two part epoxy paint. I did
:: :: this to Exocet by just rolling it on with a sponge type
:: :: roller. Then I spent many, many hours with a long board
:: :: getting it smooth as glass. Then buff it out and it will
:: :: last a long time.
:: ::
:: :: If you are wet sailing it then you will probably want
:: :: something much better for anti-fouling. I believe "Light
:: :: n Up" used some new technology stuff on their bottom
:: :: last year. Depending on were you live (i.e.- not in
:: :: California) then you can probably have a lot more
:: :: options. I forget the name of what they used but
:: :: hopefully they will chime in.
:: ::
:: :: I had the graphite stuff on the bottom of Opus when I
:: :: first bought her and when wet sanded smooth it worked
:: :: just fine for dry sailing.
:: ::
:: :: Hope this helps.
:: ::

:: :: -Jason
:: ::
:: :: -btw - what boat do you own?
:: ::
:: ::
:: :: :: Years ago I used an a graphite impregnated epoxy barrier
:: :: :: coat on a daysailor. It was a pretty standard product
:: :: :: from West system or similar. It was supposed to be
:: :: :: slippery but I cant vouch for it.
Reply | Post New Message | All Messages | this message is spam