Delta Ditch Run @ Stockton Sailing Club/Richmond Yacht Club (2012)

Delta Ditch Run at Stockton Sailing Club/Richmond Yacht Club

June 2

Story

Norcalsailing report featuring Summer Palace:
http://www.norcalsailing.com/entries/2012/06/05/ditchrun2.html#.T-iWoI2Mfqs

Below quoted from Pressure Drop: Drew Scott was helming a F-28.

"My crew is starting to swing around to pick me up when El Raton, in perfect control slides up beside me and asks if I would like to get picked up. They had already doused their chute and stopped beside me. I took their offer and got back into a boat (trying to stop a lightweight trimaran next to someone when it is blowing in the mid-20s is not easy so I figured I would not turn down El Raton.

My crew ably finished the race on Papillon, only one boat behind El Raton! And I had many adventures with El Raton, but that is their story to tell.

So, a great big thank you to the Ray Lotto and the crew of El Raton for pulling my soggy hide out of Suisun Bay!!

Drew Scott
Papillon (most of the time)"

Result

Pos	Boat	Total	Race 1
1	El Raton	1	1
2	Magic Bus	2	2
3	Peaches	3	3
4	Scandalous	4	4
5	Wile E Coyote	5	5
6	Loose Cannon	6	6
7	Take Five	7	7
8	Ergo	8	8
9	Great White	9	9
10	Libra	10	10
11	Summer Palace	11	11

export csv

Regatta Message Board

Replying to this message

Reply | Post New Message | All Messages | this message is spam

Author: Chris Gage
Subject: Floor grommets
Info: (14289 views) Posted: Wednesday 6-5-13 01:32:14 PM

You can order them through west marine and or port supply in qty of 100. I still have at least 80 left. Peace

:: A Google search for "flush finishing washer" tuned up
:: the following #8 Flush Brass Finishing Washer at
:: Fastenal:
::
:: http://www.fastenal.com/web/products/details/11233366;jsessionid=...
::
:: The manufacturer listed (Au-ve-co Products) shows #6 and
:: #10 washers in their catalog but it's not clear if one
:: can buy directly from Au-ve-co.
::
:: John-
::
::
:: :: I have the same problem... looked around but found
:: :: nothing.
:: ::
:: :: MK
:: ::
:: :: :: My floorboards are attached with screws
:: ::
:: :: :: to the stringers and have a nice grommet that sits in
:: :: :: the countersink, flush with the floor surface. I assume
:: :: :: these came with the boat
:: ::
:: :: :: I've never seen these anywhere
:: ::
:: :: :: Do others have those and does anyone know a source?

Reply | Post New Message | All Messages | this message is spam

Your Name
Your E-Mail (optional)
Subject
Password (optional - allows you to delete later)

:: You can order them through west marine and or port
:: supply in qty of 100. I still have at least 80 left.

:: Peace 
:: 
:: :: A Google search for "flush finishing washer" tuned up
:: :: the following #8 Flush Brass Finishing Washer at
:: :: Fastenal: 
:: :: 
:: :: http://www.fastenal.com/web/products/details/11233366;jsessionid=L7r2RnsQpGQrGdQ1hyQrkPfmK2GxmGht2JyD26hrqprsBZZPRGvG!423933937!-799979082 
:: :: 
:: :: The manufacturer listed (Au-ve-co Products) shows #6 and
:: :: #10 washers in their catalog but it's not clear if one
:: :: can buy directly from Au-ve-co. 
:: :: 
:: :: John- 
:: :: 
:: :: 
:: :: :: I have the same problem... looked around but found
:: :: :: nothing. 
:: :: :: 
:: :: :: MK 
:: :: :: 
:: :: :: :: My floorboards are attached with screws 
:: :: :: 
:: :: :: :: to the stringers and have a nice grommet that sits in
:: :: :: :: the countersink, flush with the floor surface. I assume
:: :: :: :: these came with the boat 
:: :: :: 
:: :: :: :: I've never seen these anywhere 
:: :: :: 
:: :: :: :: Do others have those and does anyone know a source?