Delta Ditch Run at Stockton Sailing Club/Richmond Yacht ClubJune 2
Story
Norcalsailing report featuring Summer Palace:
http://www.norcalsailing.com/entries/2012/06/05/ditchrun2.html#.T-iWoI2Mfqs

Below quoted from Pressure Drop: Drew Scott was helming a F-28.

"My crew is starting to swing around to pick me up when El Raton, in perfect control slides up beside me and asks if I would like to get picked up. They had already doused their chute and stopped beside me. I took their offer and got back into a boat (trying to stop a lightweight trimaran next to someone when it is blowing in the mid-20s is not easy so I figured I would not turn down El Raton.

My crew ably finished the race on Papillon, only one boat behind El Raton! And I had many adventures with El Raton, but that is their story to tell.

So, a great big thank you to the Ray Lotto and the crew of El Raton for pulling my soggy hide out of Suisun Bay!!

Drew Scott
Papillon (most of the time)"
Result
PosBoatTotalRace 1
1El Raton11
2Magic Bus22
3Peaches33
4Scandalous44
5Wile E Coyote55
6Loose Cannon66
7Take Five77
8Ergo88
9Great White99
10Libra1010
11Summer Palace1111
export csv

Regatta Message Board

Reply | Post New Message | All Messages | this message is spam
Author: Mark Storey
Subject: alignment of port for hoist strap
Info: (15789 views) Posted: Tuesday 5-11-10 03:18:25 PM
We just recently purchased an E27. Could anyone tell me why the port for the hoisting strap doesn't align with the strap. There must be some reason for this. I read an earlier post discussing how two extra lines secured to the toe line near the winches are required to center the strap through the hole. The former owner of this boat obviously did not realize this as there is damage to the deck at the port.

I am planning on cutting out the damage and putting a 6" port instead. Is there any reason I could not do this?

Mark

Reply | Post New Message | All Messages | this message is spam