Delta Ditch Run at Stockton Sailing Club/Richmond Yacht Club | June 2 |
Story |
Norcalsailing report featuring Summer Palace:
http://www.norcalsailing.com/entries/2012/06/05/ditchrun2.html#.T-iWoI2Mfqs Below quoted from Pressure Drop: Drew Scott was helming a F-28. "My crew is starting to swing around to pick me up when El Raton, in perfect control slides up beside me and asks if I would like to get picked up. They had already doused their chute and stopped beside me. I took their offer and got back into a boat (trying to stop a lightweight trimaran next to someone when it is blowing in the mid-20s is not easy so I figured I would not turn down El Raton. My crew ably finished the race on Papillon, only one boat behind El Raton! And I had many adventures with El Raton, but that is their story to tell. So, a great big thank you to the Ray Lotto and the crew of El Raton for pulling my soggy hide out of Suisun Bay!! Drew Scott Papillon (most of the time)" |
Result | ||||||||||||||||||||||||||||||||||||||||||||||||
|
Regatta Message Board |
Reply | Post New Message | All Messages | this message is spam |
Author: Jason ([email protected]) contact the author Subject: Pipe Berth Repair Info: (23443 views) Posted: Tuesday 6-23-09 12:10:43 PM |
:: A couple of the rivets that secure the metal rail of the
:: pipe berth to the hull have failed. Any suggestions for
:: the best way to remedy this?
::
:: Thanks
::
:: Dan
We had this happen on Opus back in the day so let me recommend you have a stopper on your drill bit when drilling out the old rivet! Luckily we were on the trailer at the time, but not a great thing seeing daylight coming through the bottom of the boat. Should be able to drill out the old rivet and install a new one. I believe they just sevure to the inner skin of the hull. I would recommend some 5200 around the rivet just to seal it up good and keep water out of the core.
cheers, Jason
Reply | Post New Message | All Messages | this message is spam |