Delta Ditch Run at Stockton Sailing Club/Richmond Yacht ClubJune 2
Story
Norcalsailing report featuring Summer Palace:
http://www.norcalsailing.com/entries/2012/06/05/ditchrun2.html#.T-iWoI2Mfqs

Below quoted from Pressure Drop: Drew Scott was helming a F-28.

"My crew is starting to swing around to pick me up when El Raton, in perfect control slides up beside me and asks if I would like to get picked up. They had already doused their chute and stopped beside me. I took their offer and got back into a boat (trying to stop a lightweight trimaran next to someone when it is blowing in the mid-20s is not easy so I figured I would not turn down El Raton.

My crew ably finished the race on Papillon, only one boat behind El Raton! And I had many adventures with El Raton, but that is their story to tell.

So, a great big thank you to the Ray Lotto and the crew of El Raton for pulling my soggy hide out of Suisun Bay!!

Drew Scott
Papillon (most of the time)"
Result
PosBoatTotalRace 1
1El Raton11
2Magic Bus22
3Peaches33
4Scandalous44
5Wile E Coyote55
6Loose Cannon66
7Take Five77
8Ergo88
9Great White99
10Libra1010
11Summer Palace1111
export csv

Regatta Message Board

Reply | Post New Message | All Messages | this message is spam
Author: Jason ([email protected]) contact the author
Subject: specs on rudder bearings
Info: (25105 views) Posted: Friday 3-17-06 03:39:20 PM
We bought a set for Moxie as well as Exocet when Russ was making them. There are definitely some slight variances in the dimensions and accurate measurements of the ID and OD should be taken before having new ones built. 

-Jason

:: I have a new set that Russ made for me a couple years
:: ago. I'll loan them to Buzz if he needs to take
:: measuerments. But I think at lease one boat owner who
:: bought these from Russ ought to vouch for them before
:: Buzz puts them into production. Russ mentioned that they
:: might be a little tight, and require some light post
:: production sanding.
:: :: I think Russ is in Mexico on his new boat cruising with
:: :: his family.
:: ::
:: :: :: Joe, Russ Reiber,who used to own Hurricane, made several
:: :: :: sets a few years ago. I see that his contact information
:: :: :: is still on the roster.
:: :: ::
:: :: :: :: Ballenger Spars no longer has the specs for the E-27
:: :: :: :: rudder bearings which two of us have on order. As a last
:: :: :: :: resort, I can remove mine and send them, but I'd like to
:: :: :: :: keep sailing. Does anyone have the specs?
:: :: :: ::
:: :: :: :: Thanks,
:: :: ::
:: :: :: :: Archimedes

Reply | Post New Message | All Messages | this message is spam