Delta Ditch Run at Stockton Sailing Club/Richmond Yacht ClubJune 12
Story
Congratulations to Get Happy!!
Recap by Brendan Busch


Aerial Photos by H20 Shots
Result
PosBoatTotalRace 1
1Get Happy!!11
2Magic Bus22
3Shenanigans33
4Light'n Up44
5Discotheque55
6Dianne66
7Take Five77
8Opa!88
9Peaches99
10Desperado1010
11Libra11DNF
11El Raton11DNF
11Archimedes11DNF
11Expressway11DNF
11Scandalous11DNF
11Elise11DNS
export csv

Regatta Message Board

Reply | Post New Message | All Messages | this message is spam
Author: Russ Rieber ([email protected]) contact the author
Subject: Cap Screws for Deck Hardware
Info: (19747 views) Posted: Saturday 8-9-03 10:50:25 PM
Are you referring to the barrel nuts with a Phillips head on the inside of the cabin? If so you can purchase them from West Marine but they want over $4.00 each for the little buggers! The company that makes them is Fasco, but I don’t know if they sell to the public. I bought mine from a local place called Ladd’s in Stockton Ca for about $0.70 each. While they don’t stock the parts they ordered mine and had them the next day. I stopped by there today and they said they would be happy to have some shipped to you if you want. Their number is (209) 477-9520.

You may have to buy a minimum of 25 but as I recall there are a lot of them in the boat, and the factory ones are chrome plated which peeled and corroded in my boat. The ones made by Fasco are stainless and of much higher quality in my opinion. Double-check what size you need because there were 2 different sizes on my boat. I have some leftover so if you only need a couple, and can’t find them locally, drop me a line and I’ll send you some.

Russ

:: Does anybody have a source for the cap screws used in
:: the interior for holding the deck hardware in place?

Reply | Post New Message | All Messages | this message is spam