Delta Ditch Run @ Stockton Sailing Club/Richmond Yacht Club (2010) - Express 27

Delta Ditch Run at Stockton Sailing Club/Richmond Yacht Club

June 12

Story

Congratulations to Get Happy!!
Recap by Brendan Busch

Aerial Photos by H20 Shots

Result

Pos	Boat	Total	Race 1
1	Get Happy!!	1	1
2	Magic Bus	2	2
3	Shenanigans	3	3
4	Light'n Up	4	4
5	Discotheque	5	5
6	Dianne	6	6
7	Take Five	7	7
8	Opa!	8	8
9	Peaches	9	9
10	Desperado	10	10
11	Libra	11	DNF
11	El Raton	11	DNF
11	Archimedes	11	DNF
11	Expressway	11	DNF
11	Scandalous	11	DNF
11	Elise	11	DNS

Regatta Message Board

Replying to this message

Reply | Post New Message | All Messages | this message is spam

Author: Steve K
Subject: Trail-Rite out of business
Info: (14540 views) Posted: Tuesday 12-29-15 11:41:04 AM

Thanks for naming a few sources for keeping the trailers roadworthy. Can anyone name a good source for trailer tires that is near RYC? Thanks, SDK

:: After I bought a new one from Trail-Rite, I rebuilt my
:: old trailer. I did a strip and paint and replaced the
:: axle, fenders, coupler, lights and just about everything
:: else on it. Total cost came to around $2,500 not
:: including anything for my time. I got the axle and some
:: other parts from Trail-Rite and the coupler and a bunch
:: of other stuff from Pacific Trailers.
::
:: Pacific Trailers was a really good resource, and has
:: just about anything you could need to get an old trailer
:: back to roadworthy status.
:: http://www.pacifictrailers.com/
::
:: :: Look around any boat yard and most owners usally
:: :: overlook trailer mainttence. It may be far less
:: :: expensive to rebuild your trailer as opposed to
:: :: purchasing a new one and here are some vendors that I
:: :: have used.
:: ::
:: :: Valleyfabrication.com in Salinas builds and repairs
:: :: farms equipment and can cut out all the bad metal and
:: :: replace it with new as well as sandblast and paint the
:: :: entire trailer on site. KKMI has a welding shop in the
:: :: back but you will need to supply the metal.
:: ::
:: :: johnsonassociates.net is less then 5 miles away has all
:: :: the trailer parts; a new trailer heads is about $125.00.
:: :: You can purchase the entire axel or just replacement
:: :: parts and they can do the installation as well. I
:: :: purchase new fenders for about $25 each.
:: ::
:: :: It takes about 4 hours and a gallons and a quart to
:: :: paint the trailer.
::
:: :: There are several Products designed to cover bare rusted
:: :: “Por 15” has excellent reviews and runs about $150.00 a
:: :: gallon. A less expensive product is Rust-Oleum rusted
:: :: metal primer, which you can by at home depot.
:: ::
:: :: 721 Abbott St, Salinas, CA 93901
::
:: :: johnsonassociates.net
::
:: :: (831) 422-9450
:: ::
:: :: 1056 Pellet Ave, Salinas, CA 93901
::
:: :: valleyfabrication.com
::
:: :: (831) 758-1312

Reply | Post New Message | All Messages | this message is spam

Your Name
Your E-Mail (optional)
Subject
Password (optional - allows you to delete later)

:: Thanks for naming a few sources for keeping the trailers
:: roadworthy.

:: Can anyone name a good source for trailer tires that is
:: near RYC?

:: Thanks, SDK 
:: 
:: :: After I bought a new one from Trail-Rite, I rebuilt my
:: :: old trailer. I did a strip and paint and replaced the
:: :: axle, fenders, coupler, lights and just about everything
:: :: else on it. Total cost came to around $2,500 not
:: :: including anything for my time. I got the axle and some
:: :: other parts from Trail-Rite and the coupler and a bunch
:: :: of other stuff from Pacific Trailers. 
:: :: 
:: :: Pacific Trailers was a really good resource, and has
:: :: just about anything you could need to get an old trailer
:: :: back to roadworthy status.
:: :: http://www.pacifictrailers.com/ 
:: :: 
:: :: :: Look around any boat yard and most owners usally
:: :: :: overlook trailer mainttence. It may be far less
:: :: :: expensive to rebuild your trailer as opposed to
:: :: :: purchasing a new one and here are some vendors that I
:: :: :: have used. 
:: :: :: 
:: :: :: Valleyfabrication.com in Salinas builds and repairs
:: :: :: farms equipment and can cut out all the bad metal and
:: :: :: replace it with new as well as sandblast and paint the
:: :: :: entire trailer on site. KKMI has a welding shop in the
:: :: :: back but you will need to supply the metal. 
:: :: :: 
:: :: :: johnsonassociates.net is less then 5 miles away has all
:: :: :: the trailer parts; a new trailer heads is about $125.00.
:: :: :: You can purchase the entire axel or just replacement
:: :: :: parts and they can do the installation as well. I
:: :: :: purchase new fenders for about $25 each. 
:: :: :: 
:: :: :: It takes about 4 hours and a gallons and a quart to
:: :: :: paint the trailer. 
:: :: 
:: :: :: There are several Products designed to cover bare rusted
:: :: :: “Por 15” has excellent reviews and runs about $150.00 a
:: :: :: gallon. A less expensive product is Rust-Oleum rusted
:: :: :: metal primer, which you can by at home depot. 
:: :: :: 
:: :: :: 721 Abbott St, Salinas, CA 93901 
:: :: 
:: :: :: johnsonassociates.net 
:: :: 
:: :: :: (831) 422-9450 
:: :: :: 
:: :: :: 1056 Pellet Ave, Salinas, CA 93901 
:: :: 
:: :: :: valleyfabrication.com 
:: :: 
:: :: :: (831) 758-1312