Spring Keel at St. Francis Yacht ClubMarch 3 - 4
Result
PosBoatTotalRace 1Race 2Race 3
1Witchy Woman6213
2Motorcycle Irene9126
3Baffett10631
4Wile E Coyote15744
5Magic Bus17458
6Xena18972
7El Raton193115
8Moxie20569
9Bessie Jay3112127
10Mirage3111911
11Peaches3214810
12Elise35131012
13Kolibri3781415
14Opa!39101514
14Wild Mojo41151313
15Radio Flyer4916DNF16
export csv

Regatta Message Board

Reply | Post New Message | All Messages | this message is spam
Author: Russ Rieber ([email protected]) contact the author
Subject: Cap Screws for Deck Hardware
Info: (19723 views) Posted: Saturday 8-9-03 10:50:25 PM
Are you referring to the barrel nuts with a Phillips head on the inside of the cabin? If so you can purchase them from West Marine but they want over $4.00 each for the little buggers! The company that makes them is Fasco, but I don’t know if they sell to the public. I bought mine from a local place called Ladd’s in Stockton Ca for about $0.70 each. While they don’t stock the parts they ordered mine and had them the next day. I stopped by there today and they said they would be happy to have some shipped to you if you want. Their number is (209) 477-9520.

You may have to buy a minimum of 25 but as I recall there are a lot of them in the boat, and the factory ones are chrome plated which peeled and corroded in my boat. The ones made by Fasco are stainless and of much higher quality in my opinion. Double-check what size you need because there were 2 different sizes on my boat. I have some leftover so if you only need a couple, and can’t find them locally, drop me a line and I’ll send you some.

Russ

:: Does anybody have a source for the cap screws used in
:: the interior for holding the deck hardware in place?

Reply | Post New Message | All Messages | this message is spam