Reply | Post New Message | All Messages | this message is spam
Author: Ralph Deeds
Subject: mast parts - correction
Info: (12659 views) Posted: Wednesday 6-1-16 10:50:24 AM

Last year I made a new spreader bar from a stock aluminum extrusion from a wholesaler. The extrusion had square corners which I ground off with a belt sander to match a borrowed spreader bar, and I bent the bar to match the original extrusion. Ballenger said the original extrusion came from a supplier in Australia and was no longer available.

:: OK, correction: the old spreader sections and spreader
:: bar sections are no longer available. Replacements are
:: available, but will require some modifications to the
:: mast to fit...
::

:: --brendan
::
::
:: :: Buzz Ballenger should have these in stock. (831)
:: :: 763-1196.
:: ::
:: :: --brendan
:: ::
:: :: :: Hi all,
:: :: ::
:: :: :: It seems like my rig on Salty Hotel needs a replacement
:: :: :: upper spreader bar. Does anybody have one of the
:: :: :: original keyed upper spreader bars (i.e. not the flat
:: :: :: bar) for me to either copy or buy?
:: :: ::
:: :: :: Thanks
:: ::
:: :: :: John
Reply | Post New Message | All Messages | this message is spam