Reply | Post New Message | All Messages | this message is spam
Author: Joe B. (jbald...@lfsus.jnj.com) contact the author
Subject: specs on rudder bearings
Info: (12677 views) Posted: Friday 3-17-06 09:10:41 PM
Thanks All! To be safe, I will take my old ones out and send them in.

-Joe

:: We bought a set for Moxie as well as Exocet when Russ
:: was making them. There are definitely some slight
:: variances in the dimensions and accurate measurements of
:: the ID and OD should be taken before having new ones
:: built.
::

:: -Jason
::
:: :: I have a new set that Russ made for me a couple years
:: :: ago. I'll loan them to Buzz if he needs to take
:: :: measuerments. But I think at lease one boat owner who
:: :: bought these from Russ ought to vouch for them before
:: :: Buzz puts them into production. Russ mentioned that they
:: :: might be a little tight, and require some light post
:: :: production sanding.
:: :: :: I think Russ is in Mexico on his new boat cruising with
:: :: :: his family.
:: :: ::
:: :: :: :: Joe, Russ Reiber,who used to own Hurricane, made several
:: :: :: :: sets a few years ago. I see that his contact information
:: :: :: :: is still on the roster.
:: :: :: ::
:: :: :: :: :: Ballenger Spars no longer has the specs for the E-27
:: :: :: :: :: rudder bearings which two of us have on order. As a last
:: :: :: :: :: resort, I can remove mine and send them, but I'd like to
:: :: :: :: :: keep sailing. Does anyone have the specs?
:: :: :: :: ::
:: :: :: :: :: Thanks,
:: :: :: ::
:: :: :: :: :: Archimedes
Reply | Post New Message | All Messages | this message is spam