Reply | Post New Message | All Messages | this message is spam
Author: Jason S.
Subject: Express 27 on a Triad J24 Trailer???
Info: (10404 views) Posted: Sunday 1-20-08 03:28:18 PM

::
::
:: ::
:: :: Hey Lilya,
::
:: :: I am looking for a used E27 or J24 or similar trailer
:: :: for my 26' MORC boat. You mentioned that you found a few
:: :: trailers in Alameda? I'm in southern california but
:: :: would make the drive if I could find a trailer at the
:: :: right price.
::
:: :: Thanks!
::
:: :: Jason
:: :: ::
:: :: ::
:: :: :: :: :: Has anyone used a J24 Triad Trailer to haul an Express
:: :: :: :: :: 27? I have compared drawings of the two boats and have
:: :: :: :: :: noticed that the keel on the E 27 lies further forward,
:: :: :: :: :: that is, the dimension from the bow to the keel looks to
:: :: :: :: :: be about the same as a J24 thus allowing the use of the
:: :: :: :: :: Triad without too many alterations. If anyone has any
:: :: :: :: :: dimensions for an Express (bow to keel), they would be
:: :: :: :: :: greatly appreciated!
:: :: :: ::
:: :: :: :: I would help you if my boat and trailer weren't locked
:: :: :: :: up in a warehouse for the winter. There are plenty of
:: :: :: :: E27s and trailers in the Bay Area if that's where you
:: :: :: :: are located. If not perhaps someone from the San
:: :: :: :: Francisco fleet could help.
:: :: :: ::
:: :: :: :: Several years ago I had a new E27 trailer built by
:: :: :: :: Cradle Ride in Ontario, Canada. Here's how I did it: I
:: :: :: :: took several pictures of an existing E27 2-wheel
:: :: :: :: trailer. I asked the builder what measurements he
:: :: :: :: needed. I took the measurements and marked them on the
:: :: :: :: photos and mailed them to the builder. A month later I
:: :: :: :: picked up a very nice replica of an original equipment
:: :: :: :: E27 trailer.
:: :: :: ::
:: :: :: :: As you know J24s weigh several hundred pounds more than
:: :: :: :: E27s, so a J24 trailer, with modifications. should work
:: :: :: :: fine.
:: :: ::
:: :: ::
:: :: ::
:: :: :: Thank you! I actually found a few in Alameda and did
:: :: :: exactly that - with tape measure and camera in hand! Now
:: :: :: for a little plasma cutting and welding. Ahhhh, women's
:: :: :: work is never done....
::
::
:: Hi Jason,

:: The trailer I had in mind for you has been sold...will
:: keep watch for you!

Thanks so much fo looking. I'll check back in case you ever happen to stumble on to one, used trailers are tough to find! My boat draws about 4.75 feet with a fixed keel so I think I could make an Express 27 or J24 etc. trailer work. Thanks again! Jason S.

Reply | Post New Message | All Messages | this message is spam