Reply | Post New Message | All Messages | this message is spam
Author: Terry Stuck ([email protected]) contact the author
Subject: Re: leaks
Info: (22935 views) Posted: Tuesday 11-27-01 08:41:00 AM
Johanna Stinson on 11/13/101 9:42 AM said:

>>has anyone experienced blowouts where the stanchions sit in the hull...I am assuning that water got in these and froze...this didn't happen in California but I moved to Maine...what to do? my boat is leaking fresh water

>>

>>

>>

Yes.........I somewhat fixed it by drilling out the tube,drilling a drain hole at the bottom to the outer hull (oversize) then refiberglassing the tube and hole to seal off the area and re drilling all tubes and drain holes smaller. It worked for a couple years.

Frankly, I am less than impressed with even that fix let alone the design. I am going to seek "Toe-rail" mounted stantions and fill the cavaties or just use thru-deck mounted stantions. Regardless, I am no longer going to use the 'tube' design. They leak and in my opinion are not safe.

Good luck

Reply | Post New Message | All Messages | this message is spam
  • leaks (23006 views) [x]
    Johanna Stinson ~ Tuesday 11-13-01 09:42:00 AM
    • Re: leaks (26380 views) [x]
      Ralph Deeds ~ Wednesday 11-14-01 04:33:00 AM
      • Re: leaks (23487 views) [x]
        Doug Poland ~ Friday 11-16-01 10:44:00 AM
        • Re: leaks (23594 views) [x]
          Jason Cosler ~ Saturday 11-17-01 08:07:00 AM
    • Re: leaks (22936 views) [x] (current)
      Terry Stuck ~ Tuesday 11-27-01 08:41:00 AM
    • Re: leaks (24624 views) [x]
      Harald Kolter ~ Thursday 11-29-01 10:08:00 AM