Reply | Post New Message | All Messages | this message is spam
Author: George Macon
Subject: Running rigging replacement
Info: (12031 views) Posted: Sunday 12-4-05 12:05:09 PM
Having sailed w/ Ralph for a while this summer, I can verify that the thinner sheets are excellent in ALL wind conditions. The sheets ran VERY easy and did not hang up the sail in light air. In heavy air, the line weight was more than adequate. I can't see a reason for anything heavier the 5/16ths, gloves or no gloves.

:: For jib and genoa sheets I use 5/16ths Samson WarpSpeed.
:: Last year I moved down a size on the theory that the
:: genoa would tack faster and better with smaller
:: diameter, lighter sheets. I'm very happy with the
:: results and would never go back to 38ths. Perhaps
:: surprisingly, nobody has complained about the smaller
:: diameter sheets being hard on their hands and several of
:: them don't use gloves.
::
:: For main and jib halyards, I had Thomas Hardware make up
:: some low-stretch rope halyards with covers at the
:: bottom. I don't remember what kind of rope it is.
:: However, you have to keep checking the top end for chafe
:: where the halyard comes out of the sheave. I've had to
:: cut a few inches off the top end of my main halyard
:: after a year or so due to chafe.

Reply | Post New Message | All Messages | this message is spam