Reply | Post New Message | All Messages | this message is spam
Author: Don (donwon9...@yahoo.com) contact the author
Subject: Filling Deck Holes
Info: (18590 views) Posted: Saturday 4-2-16 03:28:52 AM
Thanks everyone for the great input and suggestions. This timely for me as well as I am filling holes as well.

My question is how do you inject the vinyl ester in from the bottom? Easy to understand the tubes and placing in the oversize hole but do you let it dry and then fill in around or do you even fill it in? Is it possible for a scanned hand sketch?

Thanks!

:: Well....I'm glad to see that another E-27 is in the same
:: boat as me!!! I also need to do a bunch of rebedding and
:: this info is very useful...

:: A. I had no idea that epoxy shrinks...I thought only
:: Bondo shrunk and products that use a cream hardener...

:: B. The G-10 also makes great sense for compression.
::
:: My big problem is that I still need to figure out what
:: hardware is going back on :)
::
::
:: Thanks for sharing your trials and tribulations, etc. I
:: almost feel like I have joined some type of fraternity
:: here!!!
::
:: Best Regards,
::
:: Pete
::
:: :: Hi all,
:: ::
:: :: I've removed all the hardware from my deck and am about
:: :: to over-drill, fill, and re-drill.
:: ::
:: :: I'm wondering if anybody has some good tips on how to
:: :: keep the expoxy from dripping through the holes and into
:: :: the interior.
:: ::
:: :: Taped on wax paper under the hole? Wait until epoxy is a
:: :: thick consistency? Use thickeners?
:: ::
:: :: I'd love to not have to learn this one the hard way ;-)
:: ::
:: :: Thanks
:: ::
:: :: Bryan

Reply | Post New Message | All Messages | this message is spam