Reply | Post New Message | All Messages | this message is spam
Author: Jason
Subject: Express 27 on a Triad J24 Trailer???
Info: (9642 views) Posted: Tuesday 1-15-08 06:19:31 PM

Hey Lilya, I am looking for a used E27 or J24 or similar trailer for my 26' MORC boat. You mentioned that you found a few trailers in Alameda? I'm in southern california but would make the drive if I could find a trailer at the right price. Thanks! Jason

::
::
:: :: :: Has anyone used a J24 Triad Trailer to haul an Express
:: :: :: 27? I have compared drawings of the two boats and have
:: :: :: noticed that the keel on the E 27 lies further forward,
:: :: :: that is, the dimension from the bow to the keel looks to
:: :: :: be about the same as a J24 thus allowing the use of the
:: :: :: Triad without too many alterations. If anyone has any
:: :: :: dimensions for an Express (bow to keel), they would be
:: :: :: greatly appreciated!
:: ::
:: :: I would help you if my boat and trailer weren't locked
:: :: up in a warehouse for the winter. There are plenty of
:: :: E27s and trailers in the Bay Area if that's where you
:: :: are located. If not perhaps someone from the San
:: :: Francisco fleet could help.
:: ::
:: :: Several years ago I had a new E27 trailer built by
:: :: Cradle Ride in Ontario, Canada. Here's how I did it: I
:: :: took several pictures of an existing E27 2-wheel
:: :: trailer. I asked the builder what measurements he
:: :: needed. I took the measurements and marked them on the
:: :: photos and mailed them to the builder. A month later I
:: :: picked up a very nice replica of an original equipment
:: :: E27 trailer.
:: ::
:: :: As you know J24s weigh several hundred pounds more than
:: :: E27s, so a J24 trailer, with modifications. should work
:: :: fine.
::
::
::
:: Thank you! I actually found a few in Alameda and did
:: exactly that - with tape measure and camera in hand! Now
:: for a little plasma cutting and welding. Ahhhh, women's
:: work is never done....

Reply | Post New Message | All Messages | this message is spam